The newer solution dyed carpets are excellent with our Anti-microbial. There have been some instances of slight color fade with certain acid dyes. All carpets and upholstery should be tested for dye fastness prior to treatment.

Yes, moisture that is in or on the treated material or surface passes through the treatment. After curing, the treatment is somewhat hydrophobic (water repellent), but it should not be considered a replacement for commercial water repellents.

No, it does not volatilize, dissipate, or leach onto other surfaces or into the environment. Its chemistry polymerizes where it is applied and forms a permanent bond that lasts for the life of the treated surface. Normal cleaning should not remove the treatment, although it can be abraded away if the surface comes into contact with a gritty compound.

Since the cured antimicrobial is in-volatile, insoluble, and non-leaching, the treatment should last for the life of the treated surface. The life of the treated surface depends on a number of factors, not the least of which is surface preparation. If you treat a dirty or unstable surface, when the dirt comes off or the surface is disturbed, the effectiveness of the antimicrobial will decrease. Abrasive or caustic (pH 12.0) cleaners will also shorten effective life. In our experience, our applicators have seen effectiveness for a minimum of one year with normal housekeeping.

XMicrobe Anti-microbial, because of its unique chemistry, provides long-term protection against re-growth and future contamination on treated surfaces . Porous surfaces, which are contaminated below the surface, will occasionally experience some growth, which breaks through a treated surface, like grout if the space behind the wall is wet.

Surfaces should be thoroughly cleaned and any residue from cleaning agents must be rinsed from the surfaces to be treated. The final rinse should come off without any signs of dirt or foaming from the cleaners. NW Microbe Free Solutions uses an EPA registered cationic disinfectant and cleaner on needed surfaces prior to the electrostatic application of XMicrobe Antimicrobial to improve attraction of the Anti-microbial molecule to the substrate.

Microbes can be extremely hazardous. Severe contamination with hazardous organisms may require cleaning protocols similar to those for asbestos removal. For normal contamination, solid surfaces should be thoroughly cleaned before treatment. Soft surfaces such as carpets and upholstery should be well vacuumed or professionally cleaned. Insulation can be cleaned and treated if only superficial growth on the surface is present. Insulation that has heavy growth or is damp should be removed and replaced.

Yes. Not only does Fresh Start clean and disinfect kitchens, but it gets rid of cooking odors. Fresh Start can even remove odors left behind by former home owners or tenants so you start with a clean, disinfected, and odor-free kitchen. Simply wipe down surfaces, spray Fresh Start, and be secure knowing germs and smells have vanished.